Remote I/O Modules

Remote I/O Modules

Advantech is a global leader in remote IO module, offering complete stand-alone data acquisition modules which are broadly used in IoT or other industrial applications, such as facility monitoring, environment monitoring, and industrial process control. Advantech distributed remote IO modules are categorized into two families, Ethernet IO (ADAM-6000 series) and RS-485 IO (ADAM-4000 series), which are subdivided into Analog IO and Digital IO modules. Some of them support Modbus rtu communication protocol.

 

RS-485 I/O Modules: ADAM-4000

Advantech’s RS-485 I/O Modules, ADAM-4000 series, are the perfect choice for establishing a cost-effective remote I/O system. Customers can benefit from ADAM-4000 modules through its simple wiring using only two wires to communicate with their controller or other RS-485 devices. ADAM-4000 modules use the EIA RS-485 communication protocol; the industry's most widely used bi-directional, balanced transmission line suitable for industrial environments.

Robust Remote I/O Modules

ADAM-4100 series I/O modules are compact and versatile sensor-to-computer interface units. They are designed for reliable operation in harsh environments, and can operate normally in wide temperatures from -40 to 85°C, with wide power input and resistance against noise-interference.

ADAM-4117 - Robust 8-ch Analog Input Module with Modbus

ADAM-4118 - Robust 8-ch Thermocouple Input Module with Modbus

ADAM-4150 - Robust 15-ch Digital I/O Module with Modbus

ADAM-4168 - Robust 8-ch Relay Output Module with Modbus

Controller MODULES

ADAM-4000 controllers include the ADAM-4500, ADAM-4501, and ADAM-4502. The ADAM-4501 is a proportional-integral-derivative controller (PID controller) with an x86 CPU architecture, which supports not only an Ethernet interface but also serial ports. The Ethernet-enabled features include built-in HTTP Server, FTP Server and email alarm functions. The modularized I/O design provides high flexibility for versatile application requirements.

The ADAM-4500 is a fully functional, stand-alone controller for industrial automation and control. Its built-in ROM-/DOS (MS-DOS equivalent) operating system lets the user run either standard PC language development tools. One of its two communication ports can be configured as an RS-232 or RS-485 port, depending on jumper settings. The other port is a dedicated RS-485 port, allowing the controller to function in 2-wire, multi-drop RS-485 networks. With communication speeds up to 115.2 Kbps, a real-time clock, a watchdog timer, 256 K ROM, 256 K RAM, and panel or DIN-rail mounting, this device is a flexible, powerful unit in a small package.

The ADAM-4501/4501D consists of compact-sized Ethernet-enabled communication controllers with a x86 CPU architecture. They support not only an Ethernet interface but also 4 serial ports, which makes them very suitable for industrial communication and control applications. The Ethernet-enabled features include built-in HTTP Server, FTP Server and email alarm functions. The modularized I/O design provides high flexibility for versatile application requirements. The ADAM-4501/4501D also supports rich Modbus function libraries including Modbus/RTU (Master/Slave) and Modbus/TCP (Server/Client) function libraries.

With its modular design, ADAM-4502 has all the same functionality as ADAM-4501, but provides different I/O options. The ADAM-4502 provides one Ethernet interface and 4 serial ports module, but also features 1 analog input, 1 analog output, 2 digital inputs and 2 digital outputs. This versatility allows users to implement rich interfaces for different applications

ANALOG I/O MODULES

Analog input modules provide various sources of input, such as thermocouple, RTD, thermistor or general analog signals. These modules use EIA RS-485 communication protocol – the widely used bi-directional, balanced transmission line standard in the industry. ADAM-4000 supports Modbus / RTU protocol as a remote data transmission mechanism as well.

ADAM-4011 - 1-ch Thermocouple Input Module

ADAM-4012 - 1-ch Analog Input Module

ADAM-4013 - 1-ch RTD Input Module

ADAM-4015 - 6-ch RTD Input Module with Modbus

ADAM-4015T - 6-ch Thermistor Input Module with Modbus

ADAM-4016 - 1-ch Analog Input/ Output Module

ADAM-4017 - 8-ch Analog Input Module

ADAM-4017+ - 8-ch Analog Input Module with Modbus ƒ

ADAM-4018+ - 8-ch Thermocouple Input Module w/Modbus ƒ

ADAM-4019+ - 8-ch Universal Analog Input Module w/Modbus

ADAM-4021 - 1-ch Analog Output Module ƒ

ADAM-4022T -  2-ch Serial Dual Based Loop PID Controller w/ Modbus ƒ

ADAM-4024 - 4-ch Analog Output Module with Modbus

Digital I/O Modules

The Advantech ADAM-4000 digital input/output modules provide isolation and fault protection, which secure a stable operation

ADAM-4050 -  15-ch Digital I/O Module ƒ

ADAM-4051 -  16-ch Isolated Digital Input Module with Modbus ƒ

ADAM-4052 -  8-ch Isolated Digital Input Module

ADAM-4053 - 16-ch Digital Input Module ƒ

ADAM-4055 -  16-ch Isolated Digital I/O Module with Modbus ƒ

ADAM-4080 -  2-ch Counter/Frequency Modules

ADAM-4056S - 12-ch Sink Type Isolated Digital Output Module with Modbus ƒ

ADAM-4056SO - 12-ch Source Type Isolated Digital Output Module with Modbus

ADAM-4060  - 4-ch Relay Output Module ƒ

ADAM-4068 - 8-ch Relay Output Module with Modbus ƒ

ADAM-4069  - 8-ch Power Relay Output Module with Modbus

 

Ethernet I/O Modules: ADAM-6000

Advantech's Ethernet I/O Modules, ADAM-6000 series, accomplishes this integration easily through the latest internet technology, so that it can remotely monitor the device status more flexibly. ADAM-6000 modules are empowered by Peer-to-Peer (P2P) and Graphic Condition Logic (GCL), and can perform as standalone products for measurement, control and automation wiith Advantech's P2P and GCL technology. With the easy-to-use and intuitive graphic utility, system configurations can be done in an extremely short time. ADAM-6000 series models include Analog Input/Output Modules and Digital Input/Output Modules.

ANALOG I/O MODULES

Analog input modules use microprocessor-controlled, high-resolution, 16 bits, sigma-delta A / D converter to obtain the voltage, current, thermistor or RTD sensor signals.

ADAM-6015 - 7-ch Isolated RTD Input Modbus TCP Module

ADAM-6017 - 8-ch Isolated AI with 2-ch DO Modbus TCP Module

ADAM-6018 -  8-ch Isolated Thermocouple Input Modbus TCP Module w/ 8-ch DO

ADAM-6022 - Ethernet-based Dual-loop PID Controller

ADAM-6024 - 12-ch Isolated Universal I/O Modbus TCP Module

DIGITAL I/O MODULES

Digital input / output modules provide three operation modes – counter, frequency, and relay modules. Each on-module channel can be set with exclusive operation mode individually. Counter / frequency modules provide two 32-bit-counter channels and a built-in programmable timer for frequency measurement. Relay modules provide six standalone digital input channels and six independent relay channels.

ADAM-6050 - 18-ch Isolated Digital I/O Modbus TCP Module

ADAM-6051 - 16-ch Isolated DI/O with Counter Modbus TCP Module

ƒADAM-6052 - 16-ch Source-type Isolated DI/O Modbus TCP Module

ADAM-6060 -  6-ch DI and 6-ch Relay Modbus TCP Module

ADAM-6066 -  6-ch DI and 6-ch Power Relay Modbus TCP Module

EtherNet/IP Modules: ADAM-6100EI

Advantech’s ADAM-6100 series is a new line of Industrial Ethernet IO modules. Equipped with the EtherNet/IP protocol, the ADAM-6100EI series also allows daisy chain connections, making it possible to transfer data much faster during process control and other industrial automation applications. Daisy chains also provide a more scalable system and helping improve scalability and improving resistance against interference common in factory settings. Their isolated design prevents our Ethernet IO modules, ADAM-6100 series from breaking down and helps resist harmful field interference.

ADAM-6117EI - 8-ch Isolated AI EtherNet/IP Module ƒ

ƒADAM-6150EI - 15-ch Isolated DI/O EtherNet/IP Module ƒ

ADAM-6151EI - 16-ch Isolated DI EtherNet/IP Module ƒ

ADAM-6156EI - 16-ch Isolated DO EtherNet/IP Module ƒ

ADAM-6160EI - 6-ch Relay EtherNet/IP Module ƒ 

 

PROFINET Modules: ADAM-6100PN

Advantech’s ADAM-6100 series is a new line of Industrial PROFINET I/O modules. Equipped with the PROFINET protocol, the ADAM-6100PN series also allows daisy chain connections, making it possible to transfer data much faster during process control and other industrial automation applications. Daisy chains also provide a more scalable system and helping improve scalability and improving resistance against interference common in factory settings. Their isolated design prevents the ADAM-6100 series from breaking down and helps resist harmful field interference.

ADAM-6117PN - 8-ch Isolated AI PROFINET Module

ADAM-6124PN - 4-ch Isolated Analog Output PROFINET Module

ADAM-6150PN - 15-ch Isolated DI/O PROFINET Module ƒ 

ADAM-6151PN - 16-ch Isolated DI PROFINET Module ƒ 

ADAM-6156PN - 16-ch Isolated DO PROFINET Module

ADAM-6160PN - 6-ch Relay PROFINET Module

Intelligent Ethernet I/O Modules: ADAM-6200

Advantech ADAM-6200 series is a new selection of Ethernet I/O family comprised of analog I/O, digital I/O and relay modules. With Daisy chain and HTML5, ADAM-6200 series module possesses plenty of advanced features whatever the evolution of hardware design and what’s worth expecting for user is a variety of useful software functions to make it effective in the application field. With new design and strong capabilities, ADAM-6200 can be a well-integrated I/O solution in Ethernet control system.

In order to fulfill ideal remote DAQ devices in IoT world, Advantech releases ADAM-6200 series, a new selection of Ethernet I/O family comprised of analog I/O, digital I/O and relay modules. ADAM-6200 series module possesses plenty of advanced features whatever the evolution of hardware design and what’s worth expecting for user is a variety of useful software functions to make it effective in the application field. With new design and strong capabilities, ADAM-6200 can be a well-integrated I/O solution in Ethernet control system.

ƒADAM-6217 - 8-ch Isolated Analog Input Modbus TCP Module

ADAM-6224 - 4-ch Isolated Analog Output Modbus TCP Module

ADAM-6250 - 15-ch Isolated Digital I/O Modbus TCP Module

ADAM-6251 - 16-ch Isolated Digital Input Modbus TCP Module

ƒADAM-6256 - 16-ch Isolated Digital Output Modbus TCP Module

ADAM-6260 - 6-ch Relay Output Modbus TCP Module

ADAM-6266 - 4-ch Relay Output Modbus TCP Module with 4-ch DI 

WIRELESS I/O MODULES: ADAM-2000

Advantech’s Wireless I/O Modules, the ADAM-2000 series, are revolutionary products for data acquisition. Based on the IEEE 802.15.4 wireless standard, networks can be easily deployed and extended. Moreover, low rates and low duty cycles make it possible for them to act as standalone devices, providing cost-effective distributed I/O solutions. With the popular industrial communication protocol Modbus RTU, Our Wireless I/O Modules, ADAM-2000 series products can be adapted into any SCADA or industrial system with Advantech products, such as IPCs, ADAM, EKI, or WebAccess.

ADAM-2017PZ - is a wireless module with 6 analog input channels to measure the voltage and current. Its low power design allows it to be powered by 2 AA Alkaline batteries, making it an ideal module for remote data acquisition in a wide area.

ADAM-2031Z - Wireless Temperature & Humidity Sensor Node

ADAM-2051Z - Wireless 8-ch Digital Input Node

ADAM-2051PZ - Wireless 8-ch Digital Input Node with Power Amplifier

ADAM-2510Z - Wireless Router Node

ADAM-2520Z - Wireless Modbus RTU Gateway